SSAB
Since May 1, 2011, Galvano Metaal has been a exclusive dealer of Ruukki Laser sheet. Ruukki was the first steel producer in Europe who took the challenge of developing sheet steel that could be efficiently cut with lasers. Since July 2014, Ruukki has been part of SSAB. SSAB’s steel and services develops end products that are lighter while enhancing strength and extending lifespan.
SSAB is a specialized steel company driven by strong customer relationships. The name “Ruukki laser sheet’ has been changed to SSAB Laser® Plus. This steel is made of consistent high quality, reducing less waste by optimizing the cutting lines as much as possible. The quality of the cut edges is excellent, even at higher cutting speed. Additionally, the laser sheet is unaffected by the rolling direction.
Exclusive dealer
SSAB Laser® Plus is sold through selected, specialized distributors. This quarantees a high level of service with short lines to the consumer. Galvano Metaal is a exclusive dealer of SSAB Laser® Plus.
Top quality for greater assurance
Are you looking for reliability in these busy times, and therefore choosing excellent quality? Then the SSAB laser sheet is the best choice. Below you will find some key points that distinguish SSAB laser sheets:
- SSAB Laser is rolled in both length and width. Because of this process, customers can nest parts in any direction. This reduces waste and waste costs. It also helps with bending of products, as there is no need to consider the rolling direction.
- SSAB laster has a constant recoil. This means the sheet can always be bend in the correct angle. Even if you own a self correcting bendingmachine, this feature can be effective. The bending process is much faster because the bending machine has nothing to correct.
- With the SSAB laser, you can cut faster then the specifications provided by the laser manufacturer.
- SSAB Laser guarantees a tolerance of ±3mm per linear meter before and after cutting. After a lot of testing, this often results in an accuracy of up to ±0.5mm.
- Precise thickness tolerances (much tighter than EN Standards).
They achieve this quality through the following structure:
- SSAB laser works with high-quality iron ore from Sweden. This is one of the best kinds that has proven itself over decades, ensuring consistent quality.
- SSAB Laser only uses high-quality classified recycled iron in the production process.
- SSAB Laser is known as the best plate currently available in the market.
- SSAB tests all coils on the laser. They cut long strips from the sheet to check for any tension. Sheets with tension are immediately rejected. This ensures that the plate maintains a consistent quality.
- SSAB is continually developing their products.
Cut the scrap
Or in other words… less waste! One of the secrets is to share cutting lines as much as possible. With this, waste can be reduced by up to 30%. This means that with every SSAB Laser® band or quarter plate, 30% more cut parts can be produced, generating revenue and sales. SSAB Laser® is practically “dead flat” material, allowing us to guarantee a maximum deviation in flatness of 3.0 mm/m, before and also after laser cutting.
The quality of the cut edges is very excellent, even at higher cutting speeds. Another secret is that SSAB Laser® is not affected by the rolling direction. Nesting in all directions is very flexible, which means the base material can be used optimal.
And this means more yield. The all-embracing secret of SSAB Laser® may be that it delivers top-quality cut parts. Produced quick and economically, with less waste.
Read more about SSAB Laser® at www.ssab.com